KUNWU ER308L Stainless Steel TIG Welding Filler Rods 3/32" x 36"

ER308L Description

The nominal composition (wt.-%) of ER308 is 21 Cr, 10 Ni. Commercial specifications for filler and base metals vary in the minimum alloy requirements;

consequently, the names 18-8, 19-9, and 2010 are often associated with filler metals of this classification. This classification is most often used to weld base metals of similar composition, in particular, Type 304.

Same except for the low carbon (0.03 percent maximum) in ER308L filler metal reduces the possibility of intergranular carbide precipitation. This increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium. Strength of this low-carbon alloy, however, is less than that of the niobiumstabilized alloys or Type 308H at elevated temperatures.

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347
Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion
Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications
Straight length of 36 inch packaged in a PVC tube (Random Color)